General Information; General Identification; Safety Features - McCulloch TM502 Manuel D'utilisation

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983
22
9
10
11
18

1-1.GENERAL IDENTIFICATION

1. GUIDE BAR
2. SAW CHAIN
3. SAW CHAIN ADJUSTMENT SCREW
4. SPARK ARRESTER SCREEN
5. CHAIN BRAKE ® LEVER / HAND GUARD
6. FRONT HANDLE
7. STARTER HANDLE
8. SPARK PLUG
9. AIR CLEANER COVER
10. STOP SWITCH
11. SAFETY TRIGGER
12. OIL TANK CAP
13. STARTER COVER
14. FUEL TANK CAP
15. REAR HANDLE / BOOT LOOP
16. CHOKE LEVER
17. BAR RETAINING NUTS
18. THROTTLE / TRIGGER
19. CHAIN CATCHER
20. CHAIN BRAKE ® COVER
21. SCREWDRIVER / WRENCH
22. CARRY CASE (Available on some models)
NOTE: Study your saw and be familiar with its parts.

1 - GENERAL INFORMATION

21
2
8
17
20
19
www.mymowerparts.com www.mymowerparts.com
4
1
3
12

1-2. SAFETY FEATURES

Numbers preceding the descriptions correspond with the
numbers on preceding page to help you locate the safety
feature.
2 LOW KICKBACK SAW CHAIN helps significantly
reduce kickback, or the intensity of kickback, due to
specially designed depth gauges and guard links.
4 SPARK ARRESTER SCREEN retains carbon and other
flammable particles over 0.023 inches (0.6mm) in size
from engine exhaust flow. Compliance with local, state
and federal laws and/or regulations governing the use of
a spark arrester screen is the user's responsibility. See
Safety Precautions for additional information.
5 CHAIN BRAKE
operator's left hand in the event it slips off the front han-
dle while saw is running.
5 CHAIN BRAKE
the possibility of injury due to kickback by stopping a
moving saw chain in milliseconds. It is activated by the
CHAIN BRAKE ®
10 STOP SWITCH immediately stops the engine when
tripped. Stop switch must be pushed to ON position to
start or restart engine.
11 SAFETY TRIGGER prevents accidental acceleration of
the engine. Throttle trigger (19) cannot be squeezed
unless the safety latch is depressed.
19 CHAIN CATCHER reduces the danger of injury in the
event saw chain breaks or derails during operation. The
chain catcher is designed to intercept a whipping chain.
3
5
6
7
13
14
LEVER / HAND GUARD protects the
®
® is a safety feature designed to reduce
lever.
16
15