Kohler Mariposa Serie Guide D'installation Et D'entretien page 5

2. Disconnect the Pump
NOTE: Do not cut the whirlpool harness (piping) for this custom installation.
Disconnect the pump and heater (if included) from the shipping location by cutting the two banding
straps with a tin snips.
Move the pump and heater aside.
Relocate the pump and heater next to the customized inlet/outlet connections of the whirlpool
harness. The pump may protrude beyond the rim of the bath.
Kohler Co.
Cut the pump
banding straps.
5 1193347-2-B