Publicité

Liens rapides

MAMMOTH
BASKETBALL SYSTEM
MODEL 90965
BEFORE ASSEMBLY:
• Requires at least 1680 lb (762 kg) of concrete mix to fi ll
a volume of 12.25 ft
3
(0.35 m
3
).
• Requires 3+ days for concrete to cure, plus 3-4 hours
to complete assembly steps.
• 6+ people required for setup. At least 3 adults are
needed for the assembly steps at all times, with some
steps requiring 6 or more adults.
ADDITIONAL ASSEMBLY HELP
WATCH THE INSTRUCTIONAL VIDEOS ON YOUTUBE
Scan the code, or search go.lifetime.com/90965assembly IN THE APP, SCAN OR SEARCH #1213394
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
TOOLS REQUIRED
15/16"
(≈24 mm)
(x2)
(x1)
(x1)
or 80 lb bag (x 21)
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am–5:00 pm (Monday–Friday) MST
and 9:00 am–1:00 pm Saturday MST
ASSEMBLE IT WITH THE FREE BILT INTELLIGENT
INSTRUCTIONS APP
9/16"
(≈14 mm)
3/16"
(x2)
(x2, included)
(x1)
(x1)
Concrete Mix
3
.5 yd
(x1)
Live Chat:
www.lifetime.com/customerservice
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
(≈5 mm)
(x1)
(x1)
Rebar
36"
(x4)
(.9 m)
(x1)
For Customer Service in Mainland
Europe and the United Kingdom,
E-mail: cs@lifetimeproducts.eu
TABLE OF CONTENTS
Icon Legend................................4
Warnings and Notices.................5
Initial Setup...............................6
Extension Arms Assembly.........11
Handle Assembly......................15
Backboard to Pole Assembly.......24
(x1)
Parts Identifi er..........................i-iv
Pole to J-Bolt Template
Assembly...............................28
Rim to Backboard Assembly.......35
Maintenance Instructions..........41
(x6)
Replacing the Backboard...........42
Warning Sticker........................45
Registration........................48
Warranty................................49
Model Number: 90965
Product ID:

Publicité

Table des Matières
loading

Sommaire des Matières pour Lifetime MAMMOTH

  • Page 1 ASSEMBLE IT WITH THE FREE BILT INTELLIGENT INSTRUCTIONS APP Scan the code, or search go.lifetime.com/90965assembly IN THE APP, SCAN OR SEARCH #1213394 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
  • Page 2: Instructions D'assemblage

    36 kg (x 21) Garantie.........50 N° de modèle : 90965 ® QUESTIONS ? CONTACTEZ AUX SERVICES À LA CLIENTÈLE LIFETIME Référence du produit : Composer le 1-800-225-3865 t’Chat en direct: Pour nos services à la clientèle du www.lifetime.com/customerservice continent européen et au Royaume-Uni,...
  • Page 3: Table Des Matières

    Garantía........51 o bolsa de 36 kg (x 21) Número de modelo: 90965 ® ¿PREGUNTAS? PÓNGASE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME ID del producto: Para nuestros servicios a clientes Llamar : 1-800-225-3865 Chat en vivo: en el continente europeo y el www.lifetime.com/customerservice...
  • Page 4: Leyenda De Íconos

    ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Ceci indique que vous devez faire attention à ce que vous lisez. • Indica que uno debe prestar atención al leer. •...
  • Page 5: Safety Instructions

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this product without following the instructions carefully.
  • Page 6 INITIAL SETUP / RÉGLAGE INITIAL / ESTABLECIMIENTO INICIAL HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware blister pack / Blister de quincaillerie / Blister de herraje AER (x8) CYV (x1) AEO (x1) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts AEZ (x4) AKT (x1)
  • Page 7 • En cas d'avoir des problèmes avec cette section, suivre le code QR en dessous pour voir un vidéo de l’assemblage. • En caso de tener problemas con esta sección, seguir el código QR debajo para ver un video del ensamble. • http://go.lifetime.com/90965section1 • Dig a hole 48" (122 cm) deep and 21" (54 cm) square. The edge of the hole should be flush with the edge of the playing court.
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 15/16" (x2) (24 mm) AEO (x1) AER (x8) CYV (x1) • Thread a nut (AER) all the way onto each J-bolt (AEI). Slide the threaded ends of the J-bolts through the corner holes in the template (AKT), and secure them completely with the nuts (AER).
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (80 lb Bag x 21) • If you are using concrete mix, mix the concrete according to the instructions on the bags. Please note that a thicker mix of concrete will dry stronger.
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS • Center the template (AKT) over the hole. The front of the template is the side with the nut coupler (CYV) and should face toward the playing surface.
  • Page 11 EXTENSION ARMS ASSEMBLY / ASSEMBLAGE DES BRAS DE RALLONGE / L’ENSAMBLE DE LOS BRAZOS DE EXTENSIÓN HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware blister pack / Blister de quincaillerie / Blister de herraje 8.54” (21.7 cm) 5.8” (14.6 cm) (Not actual length / Non à...
  • Page 12 • En caso de tener problemas con esta sección, seguir el código QR debajo para ver un video del ensamble. • http://go.lifetime.com/90965section2 • Secure one bolt (GDN) and washer (GDO) to one end of the 8.54" (≈22 cm) coupling pin (GIL).
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS EEO-3/16" (≈5 mm) (x2) AEH (x2) GDN (x1) GDO (x1) • Secure the lower extension arm assembly (AKE) to the pole using the hardware shown. Make sure to place a plastic spacer (AEH) in between the lower extension arm and the pole.
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 5.8” (14.6 cm) EEO-3/16" (≈5 mm) (x2) (Not actual length) GIM (x1) GDN (x2) (Non à l'échelle) (No está...
  • Page 15 HANDLE ASSEMBLY / ASSEMBLAGE DE LA POIGNÉE / ENSAMBLE DE LA MANIVELA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware blister pack / Blister de quincaillerie / Blister de herraje GIK (x1) 8.54” (21.7 cm) GFA (x6) GIL (x1) (Not actual length / Non à...
  • Page 16 HANDLE ASSEMBLY / ASSEMBLAGE DE LA POIGNÉE / ENSAMBLE DE LA MANIVELA PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Large parts / Grandes pièces / Piezas grandes GFL (x1) ALS (x2) AKI (x1) TOOLS REQUIRED / OUTILS REQUIS / HERRAMIENTAS REQUERIDAS EEO-3/16"...
  • Page 17 • En caso de tener problemas con esta sección, seguir el código QR debajo para ver un video del ensamble. • http://go.lifetime.com/90965section3 • Secure one bolt (GDN) and washer (GDO) to one end of 5.8" (≈ 15 cm) coupling pin (GIM).
  • Page 18 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS EEO-3/16" (≈5 mm) (x2) GFC (x1) GDN (x2) GDO (x2) • Secure one bolt (GDN) and washer (GDO) to one end of the 1.6" (≈4 cm) coupling pin (GFC). •...
  • Page 19 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 8.54” (21.7 cm) EEO-3/16" (≈5 mm) (x2) AEH (x2) GIL (x1) (Not actual length / Non à l’échelle / No está...
  • Page 20 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS EEO-3/16" (≈5 mm) (x2) GFC (x1) GDN (x2) GDO (x2) GFA (x2) • Secure one bolt (GDN) and washer (GDO) to one end of the 1.6" (≈ 4 cm) coupling pin (GFC). •...
  • Page 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS EEO-3/16" (≈5 mm) (x2) GFC (x1) GDN (x2) GDO (x2) GFA (x2) • Repeat steps 3.7 and 3.8 to secure the remaining lifter arm to the handle assembly. •...
  • Page 22 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS GDQ (x1) GDP (x1) 3.10 • Slide the pin cover clip (GDP) over the trigger brackets until it rests against the handle. •...
  • Page 23 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS EEO-3/16" (≈5 mm) (x2) GIJ (x1) GIH (x2) GDO (x2) GDN (x2) 3.12 • Secure one bolt (GDN) and washer (GDO) to one end of the 5.4" (≈ 14 cm) coupling pin (GIJ). •...
  • Page 24: Ensamble Del Tablero Al Poste

    BACKBOARD TO POLE ASSEMBLY / ASSEMBLAGE DU PANNEAU AU POTEAU / ENSAMBLE DEL TABLERO AL POSTE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware blister pack / Blister de quincaillerie / Blister de herraje 6.7” (17 cm) GEN (x1) (Not actual length / Non à...
  • Page 25 • En caso de tener problemas con esta sección, seguir el código QR debajo para ver un video del ensamble. • http://go.lifetime.com/90965section4 • Secure one bolt (GDN) and washer (GDO) to one end of a 6.7" (≈ 17 cm) coupling pin (GEN).
  • Page 26 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 15/16" (24 mm) EEO-3/16" (≈5 mm) (x2) GDN (x1) AEH (x2) GDO (x1) • Attach the lower extension arms (AKE) to the backboard (AJI) using the hardware shown. •...
  • Page 27 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS This page intentionally left blank Cette page a été laissée vierge intentionnellement Esta página se ha dejado en blanco intencionadamente...
  • Page 28 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS Parts shown at 10% of Actual Size / Pièces illustrées à 10% de la dimension réelle / Piezas ilustrados a 10% del tamaño real AKE (x1) ALS (x2) AKD (x2) GFL (x1) AKI (x1) AKZ (x1)
  • Page 29 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS Parts shown at 5% of actual size / Pièces illustrées à 5% de la dimension réelle / Piezas ilustrados a 5% del tamaño real ALG (x1) Actual Size / Dimension réelle / Tamaño real ALC (x1) AJI (x1)
  • Page 30 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS This page intentionally left blank Cette page a été laissée vierge intentionnellement Esta página se ha dejado en blanco intencionadamente...
  • Page 31 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS EEO-3/16" (≈5 mm) (x2) GDN (x2) GDO (x2) AEG (x4) • Attach the upper extension arm (AKD) to the backboard (AJI) using the hardware shown. •...
  • Page 32 POLE TO J-BOLT TEMPLATE ASSEMBLY / ASSEMBLAGE DU MODÈLE DE POTEAU AU BOULON EN FORME DE " J " / ENSAMBLE DE LA PLANTILLA DEL POSTE AL PERNO EN FORMA DE "J" HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware blister pack / Blister de quincaillerie / Blister de herraje...
  • Page 33 • En caso de tener problemas con esta sección, seguir el código QR debajo para ver un video del ensamble. • http://go.lifetime.com/90965section5 • DO NOT PROCEED with this section until the concrete from Section 1 has been allowed to cure at least 72 hours (3 days).
  • Page 34 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS • Position the pole so the slots in the plate at the bottom of the pole align with the two J-bolts closest to the playing surface.
  • Page 35 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 15/16" (24 mm) BIP (x4) ADL (x4) • AT LEAST FIVE PEOPLE SHOULD SUPPORT THE POLE as •...
  • Page 36 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 15/16" (24 mm) AMS (x4) • Place a nylon cap (AMS) onto each J-bolt. • Tighten the four hex nuts (ADL) above the plate at •...
  • Page 37 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS EEO-3/16" (≈5 mm) (x2) GFC (x1) GDN (x2) GDO (x2) • Secure one bolt (GDN) and washer (GDO) to one end of a 1.6" (≈ 4 cm) coupling pin (GFC). •...
  • Page 38 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS • Install the padlock (ALC) to prevent the handle from moving while the rest of the assembly is completed. •...
  • Page 39 RIM TO BACKBOARD ASSEMBLY / ASSEMBLAGE DE L’ANNEAU AU PANNEAU / ENSAMBLE DEL ARO AL TABLERO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware blister pack / Blister de quincaillerie / Blister de herraje ADU (x2) ABB (x4) CHQ (x4) AAF (x8) PARTS REQUIRED / PIÈCES REQUIS / PIEZAS ALX (x1)
  • Page 40 • En caso de tener problemas con esta sección, seguir el código QR debajo para ver un video del ensamble. • http://go.lifetime.com/90965section6 • Slide a flat washer (AAF) onto to a hex bolt (CHQ). Do this for two washers and two bolts.
  • Page 41 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 9/16" (x2) (14 mm) (x2) ABB (x2) AAF (x2) • Align the rim with the backboard (AJI), and slide the bolts through the upper set of holes in the mounting plate. Secure the hardware with flat washers (AAF) and centerlock nuts (ABB) on the reverse side of the backboard as shown.
  • Page 42 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 9/16" (x2) (14 mm) CHQ (x2) ABB (x2) AAF (x4) • Slide the hex bolt (CHQ) and flat washer (AAF) into the middle hole in the rim assembly and through the backboard. Secure the hardware with another flat washer and a centerlock nut (ABB) on the backside of the backboard as indicated.
  • Page 43 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 9/16" (14 mm) ADU (x2) • Using a wrench, adjust the tension of the rim (ALX) by tightening the nuts at the bottom of the springs. •...
  • Page 44 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS • Attach the net (AKZ) to the rim (ALX). • Attacher la filet (AKZ) à l’anneau (ALX). •...
  • Page 45: Mantenimiento

    MAINTENANCE / ENTRETIEN / MANTENIMIENTO The life of your basketball system depends on many variables. The climate, exposure to corrosives such as salt, pesticides, or herbicides, and excessive use or misuse can all contribute to pole failure, which may cause property damage or personal injury. Check your basketball system frequently for loose hardware, excessive wear, and signs of corrosion.
  • Page 46: Reemplazar El Tablero

    Appendix Apppendice REPLACING THE BACKBOARD / REMPLACER LE PANNEAU / REEMPLAZAR EL TABLERO Apéndice • In the event the backboard should need replacing, please follow the instructions below. Never remove the backboard from the system without first dissasembling the system as instructed. At least six adults are required to complete the following steps. •...
  • Page 47 Appendix Apppendice REPLACING THE BACKBOARD / REMPLACER LE PANNEAU / REEMPLAZAR EL TABLERO Apéndice • Using at least six adults, carefully lower the system to the ground. • En employant au moins six adultes, descendre avec soin le système au sol. •...
  • Page 48 Appendix Apppendice REPLACING THE BACKBOARD / REMPLACER LE PANNEAU / REEMPLAZAR EL TABLERO Apéndice • Being careful of the glass, reverse the steps in Section 6 to remove the rim from the backboard. Set aside the Rim and all hardware for re-assembly with a replacement backboard. •...
  • Page 49: Autoadhesivo De Advertencia

    • Do not hang on the ring! ADJUSTING SYSTEM HEIGHT TO RAISE OR LOWER THE GOAL: GRASP ADJUSTMENT HANDLE FIRMLY AND RAISE OR LOWER GOAL. WHEN THE DESIRED HEIGHT IS REACHED, RELEASE ADJUSTMENT HANDLE. Lifetime Products, Inc., Clearfield, UT 84016 1-800-225-3865 www.lifetime.com Made in China 2/1/2018...
  • Page 50 WARNING STICKER / AUTOCOLLANT D’AVERTISSEMENT / AUTOADHESIVO DE ADVERTENCIA En français : En español: AVERTISSEMENT ADVERTENCIA LE NON-RESPECT DE SUIVRE CES AVERTISSEMENTS PEUT OCCASIONNER DES EL INCUMPLIMIENTO DE SEGUIR ESTAS ADVERTENCIAS PUEDE RESULTAR EN LESIONES GRAVES Y/O DAÑO A LA PROPIEDAD. BLESSURES GRAVES ET/OU DES DOMMAGES À...
  • Page 51 NOTES / REMARQUES / NOTAS...
  • Page 52 ENREGISTREZ VOTRE PRODUIT EN LIGNE CHEZ NOUS À WWW.LIFETIME.COM Chez Lifetime®, nous nous engageons à fournir des produits innovateurs de qualité. Lors de votre inscription, vous aurez l’occasion de nous faire parvenir vos commentaires. Votre opinion est importante pour nous.
  • Page 53 3. This warranty is nontransferable and is expressly limited to the repair or replacement of defective product. If the product is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser.
  • Page 54 3. Cette garantie n’est pas transférable et est expressément limitée à la réparation ou au remplacement du produit défectueux. Si le produit est déclaré défectueux selon les termes de cette garantie, Lifetime Products, Inc. réparera ou remplacera les parties défectueuses gratuitement pour l’acheteur. Les frais d’expéditions aller et retour de l’usine ne sont pas couverts et sont à la charge de l’acheteur.
  • Page 55: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. 1. El comprador original recibe la garantía de que los sistemas de basquetbol Lifetime estarán libres de defectos de material o de mano de obra por un período de cinco años a contar desde la fecha de la compra original. La palabra “defectos” se defi ne como imperfecciones que perjudican el uso del producto.
  • Page 56 7:00 am–5:00 pm (M–F) MST and 9:00 am–1:00 pm Saturday MST ® AMÉLIORER L’ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU D’AUTRES PRODUITS ® Pour acheter des accessoires ou des autres produits Lifetime , visiter le : www.lifetime.com (Anglais seulement) Ou composer le 1-800-424-3865 Du lundi au vendredi de 7 h à...

Ce manuel est également adapté pour:

90965

Table des Matières