LaMotte WaterLink Spin Touch DW Mode D'emploi page 13

Cloth Wipe
BLE Mobile Printer
WaterLink Spin Touch DW Manual
WaterLink Spin Touch DW Quick Guide
For available reagent disks, see Disk Descriptions.
WARNING: only use the USB cable and wall adapter that are supplied with the kit. Make no
substitutions.
SPECIFICATIONS
Instrument Type
Wavelengths
(interference filters)
Display
Wavelength Accuracy
Wavelength Bandwidth
Photometric Range
Photometric Precision
Photometric Accuracy
Sample Chamber
Light Source
Detectors
Pre-Programmed Tests
Languages
Temperature
Operation Humidity Range
Communication
Calibration
Firmware
Software
Power Requirements
Battery Type
Minimum Capacity
Charge Life
Battery Life
Full Charge
Centrifugal Fluidics Photometer
390 nm, 428 nm, 470 nm, 525 nm, 568 nm, 635 nm
Color Capacitive Touchscreen, 3.5 in, 320 x 240 pixel resolution
±2 nm
10 typical
-2 to 2 AU
±0.01 AU at 1.0 AU
±0.01 AU at 1.0 AU
Accepts prefilled disk
6 LEDS
6 silicon photodiodes
Yes, with automatic wavelength selection
English, French, Spanish, German, Dutch, Swedish, Portuguese,
Italian, Chinese, Turkish
Operation: 0-50 °C; storage – 40-60 °C
0- 90 % RH, non-condensing
USB-C, Bluetooth low energy technology (BLE)
Factory set, field calibration via internet connection
Internet updateable (New Test, New Test Calibrations, etc.).
Requires a USB connection to Windows PC
WaterLink Solutions (Web, Android, iOS), DataMate Web (Web,
Android, iOS), WaterLink Connect 2
USB wall adapter, USB computer connection or internal lithium
ion rechargeable battery
Lithium ion
12 V/2.6 AH
Approximately 150 tests
Approximately 500 charges
10-12 hours
13
3580-WIPE
5-0067
3585-MN
3585-QG