Checking The Package Contents; Names And Functions Of Each Part; Main Unit - BOXLIGHT MP-86i Manuel D'utilisation

Checking the package Contents

Make sure all of the following items are included in the package. If anything is missing, please contact
BOXLIGHT.
Projector unit
a
Power Cord
110V-US
220-UK, Europe

Names and functions of each part

Main unit

ZOOM button
Used to adjust the size of the
image. (Refer to page 13.)
MUTE button
This button turns the sound on and
off. Press once to turn the sound off;
then press again to turn the sound
back on.
STANDBY / ON button
Press this button to turn the power on
and off. When turned off, the projector
enters standby status. Refer to page 13
- 14 for details.
LAMP indicator
Lights or flashes when the temperature
inside the projector increases or the lamp
does not light. Refer to page 33 for details.
POWER indicator
This indicator lights or blinks during standby
and during operation. Refer to page 33 for
details.
Remote control I/R receiver
Lens
Lens cap
• Use the remote control in front of the remote control photoreceptor at a distance
of about 16.4" or less and an angle of 30 degrees to the left or right of the center.
8
Remote control
b c
3-Conductor RGB cable
video/Audio cable (15-15 pin M/M)
ZOOM
MUTE
STANDBY/ON
VIDEO RGB
LASER
STANDBY/ON POSITION
RESET
MENU
FREEZE
MAGNIFY VOLUME
OFF
Remote control
d
Mac adapter
Mouse cable × 3
with dip switch
FOCUS
INPUT
MENU
RESET
LAMP POWER TEMP
MP-86i
Liquid Crystal Projector
OPERATING GUIDE
Flüssigkristall-Projektor
BEDIENUNGSANLEITUNG
Vidéoprojecteur à cristaux liquides
NOTICE D'UTILISATION
Proittore a cristalli liquidi
LIBRETTO D'ISTRUZIONI
Proyector con paneles de cristal líquido
MANUAL DE INSTRUCCIONES
Vloeibare-kristallen Projektor
GEBRUIKSAANWIJZING
Batteries
Flytende krystall prosjektør
BRUKERHÅNDBOK
User's Guide (this document)
FOCUS button
Used to adjust the focus of the image on the
screen. (Refer to page 13.)
INPUT button
Press this button to switch the input. The input
changes in the following sequence each time
this button is pressed.
RGB1 RGB2
MENU button
Displays the menu. Refer to page 17 - 21 for
details.
RESET button
Used to reset the initial settings.
Refer to page 10.17.25.26 for details.
TEMP indicator
Blinks when the fan malfunctions. Refer to
page 33 for details.
Speaker
Carrying handle
Cooling fan
(intake side)
VIDEO
Speaker
Cooling fan
(exhaust side)