Initial Filling Or Rinsing Of The Entire Interchangeable Unit - Xylem SI Analytics TitroLine 7500 KF Mode D'emploi

91
Fig. 18

2.8 Initial Filling or Rinsing of the Entire Interchangeable Unit

Initial filling of the interchangeable unit is done using the <rinsing > rinsing programme.
Fig. 19
On the main menu (fig. 19), press <MODE> key to navigate to the methods/system (fig. 20).
Fig. 20
Pressing <↑> twice will take you to the <Rinsing> selection immediately (fig. 21).