Installing And Removing The Battery; Starting And Stopping; Starting Instructions; Stopping Instructions - Remington RM4030 Manuel De L'opérateur

INSTALLING AND REMOVING THE BATTERY

WARNING:
Avoid accidentally starting the unit. To
prevent serious injury, DO NOT squeeze the trigger when
installing or removing the battery. Refer to Starting and
Stopping. Remove the battery from the unit when it is not
in use.
Installing the Battery
1. Grasp the handle firmly (Fig. 6). DO NOT squeeze the trigger.
Refer to Starting and Stopping.
2. Slide the battery into the battery port (Fig. 6). Push the battery
firmly until the battery locks into place (Fig. 6). There should be
an audible "click."
3. Gently pull the battery to make sure it is securely locked in place.
Removing the Battery
1. Grasp the handle firmly (Fig. 6). DO NOT squeeze the trigger.
Refer to Starting and Stopping.
2. Press the battery release button to unlock the battery (Fig. 6).
3. Pull the battery out of the battery port (Fig. 6).
NOTE: It may require a strong pull to remove the battery.
WARNING:
When starting the unit, make sure it is not
directed toward people, animals, windows, automobiles or
loose debris.

STARTING INSTRUCTIONS

1. Install the battery. Refer to Installing the Battery.
2. Squeeze and hold the trigger to start the unit (Fig. 7).
3. Squeeze the trigger to the degree needed for the operation.

STOPPING INSTRUCTIONS

1. Release the trigger (Fig. 7).
2. Wait for all moving parts to come to a complete stop.

STARTING AND STOPPING

11
Handle
Battery Release
Button
Battery
Battery Port
Fig. 6
Trigger
Fig. 7