Sony VPL-FH500L Guide De Référence Rapide page 44

Attaching/Removing the Projection
Lens
Notes
• Turn off the projector and disconnect the AC power cord from a wall outlet before you remove/
attach the projection lens.
• Be careful not to drop the projection lens.
• Avoid removing/attaching the lens with the projector installed suspended from a ceiling.
• Avoid touching the lens surface.
• For usable projection lenses and a lens adapter, see "Specifications".
Attaching
1
Loosen the four screws that secure the
front panel to remove the front panel
in the direction of the front
Screws
2
Make the preparations required for
the projection lens you are using.
18
GB
Attaching/Removing the Projection Lens
.
Front panel
Screws
VPLL-FM22/ZM32/ZM42/ZM102/
Z4011:
A Removing the compensating glass
(page 19)
*1
VPLL-FM21 /ZM31
ZM32/ZM42/ZM102:
B Attaching the projection lens
adapter (page 20)
*1
VPLL-ZM101 :
B Attaching the projection lens
adapter (page 20)
C Attaching the shading sheet
(page 22)
VPLL-4008/Z4011/Z4015/Z4019/
Z4025/Z4045
There is no need to attach the
projection lens adapter to the
projector.
3
Insert the four screws (supplied with
the projector) to the flange section of
the projection lens.
*1
/ZP41/FM22/
Flange
section