Victron energy MultiPlus-II 12/3000/120-32 Manuel page 10

Charger
Mains on
on
Bulk
off
Absorption
charger
only
Float
Charger
Mains on
on
Bulk
off
Absorption
charger
only
Float
Special Indications
PowerControl
Charger
Mains on
on
Bulk
off
Absorption
charger
only
Float
Power Assist
Charger
Mains on
on
Bulk
off
Absorption
charger
only
Float
For more error codes see section 7.3
For the latest and most up to date information about the blink codes,
please refer to the Victron Toolkit app.
Click on or scan the QR code to get to the Victron Support and
Downloads/Software page.
8
Inverter
Inverter on
The mains voltage is switched
Overload
through and the charger operates in
float mode.
Low battery
Temperature
Inverter
Inverter on
The mains voltage is switched
Overload
through and the charger operates in
equalize mode.
Low battery
Temperature
Inverter
Inverter on
The AC input is switched through.
Overload The AC output current is equal to
the preset maximum input current.
The charge current is reduced to 0.
Low battery
Temperature
Inverter
Inverter on
The AC input is switched through
but the load requires more current
Overload
than the preset maximum input
current. The inverter is switched on
to supply the required additional
Low battery
current.
Temperature