Publicité
Les langues disponibles
Les langues disponibles
English
EN
Operating Machine:
1.
Lift the cord retaining clip at the rear of the machine (Fig.1) and insert the power cord plug (Fig.2).
2.
Lower the cord retaining clip over the plug to secure in position (Fig. 3)
3.
Plug the power cord into a 120V grounded electrical outlet (Fig.4). Always unwind the cord completely before vacuuming.
It is important to maintain the power cord in good condition.
4.
The machine is equipped with a two speed switch. The center position is the high speed setting and the low speed setting
is to the right. Select the suitable speed setting and push down to operate (Fig.5).
5.
When using the machine on carpets press the rocker switch on the combination floor tool to raise the brushes (Fig 6).
6.
When using the machine on hard floors press the rocker switch on the combination floor tool to lower the brushes (Fig 7).
1
5
6
7.
After use, turn off the machine and unplug the cord from the electrical outlet. Wrap the power cord around the cord
storage hooks at the rear of the machine (Fig. 1) and store all cleaning tools on machine as shown (Fig.2)
1
6
2
II/I
7
2
3
4
3
Nobles Tidy-Vac 6 (08-2013)
Publicité
