Miele CarCare Mode D'emploi page 52

en (US/CA)
The CarCare accessories have been
designed for fast and thorough clea-
ning of your car.
They can be connected to the following
Miele canister vacuum cleaners.
– S 500 – S 557
– S 600 – S 657
– S 700 – S 757
– S 800 – S 857
– S 2000 – S 2999
– S 4000 – S 4999
– S 5000 – S 5799
– S 6000 – S 6799
Using the accessories
(see illustrations on pages 2 and 3)
a Flexible crevice nozzle
Tool for cleaning hard-to-reach pla-
ces.
b Hose extension approx. 5 ft. (1.5 m).
The hose extension is be used bet-
ween the handle and hose
(USA/CDN: not to be used with mo-
dels that operate with an electric
hose).
c Multi-purpose brush
For cleaning the dashboard.
d Hand-held Turbobrush
To vacuum car seats, carpeted floor
space and trunk.
Observe the cleaning instructions of
the manufacturer of the surface to
be cleaned.
52
Maintenance of the Hand-held
Turbobrush
,
Always turn off and unplug the
vacuum cleaner before cleaning or
performing maintenance work on the
Hand-held Turbobrush.
Removing threads and hairs
^ With a pair of scissors, cut any thre-
ads or hairs that have become tan-
gled on the roller brush. To guide the
scissors, follow the guide track in the
roller.
^ Then turn on the vacuum cleaner to
vacuum up the bits.
For stubborn dirt or blockages inside
the Hand-held Turbobrush, the cover
can be opened. Any large particles in-
side it can then be easily removed.
^ Press the release button and remove
the service flap opposite it.
^ Remove any debris from the inside of
the casing and from the brush roller.
^ Replace the service flap.
Changing the thread catcher
Replace the thread catcher of the
Hand-held Turbobrush when the pile is
worn.
^ Use a knife or similar object to remo-
ve the thread catcher pads from the
slots.
^ Press the new thread catcher into the
slots.