Application Support - Belden Hirschmann OZD Genius G12 Serie Manuel

5 Technical Data
Repeater
Ord. code
Safety
VDE regulation
Electromagnetic compatibility (EMC)
Immunity for industrial environments according
EN 61000-6-2:2001
Electrostatic discharge (ESD)
Electromagnetic field
Fast transients (burst)
Surge
Line-conducted disturbances
Interference emissions
Climatic ambient conditions
Ambient temperature
Storage temperature
Relative humidity
Mechanical ambient conditions
Vibration (during operation)
Vibration (during transport)
Degree of protection
Weight
Dimensions W × H × D
Housing material
The repeater does not contain any silicone.

6 Application Support

Contact address for technical support
Hirschmann Automation and Control GmbH
Stuttgarter Strasse 45 - 51
72654 Neckartenzlingen
Germany
Tel.: +49 (0)1805 14-1538
Fax: +49 (0)7127 14-1551
E-Mail: HAC.Support@Belden.com
Internet: http://www.hirschmann.com
Version 05 07/2014
OZD Genius G12
933 989-021
IEC/EN 60950
Satisfies EN 61000-4-2; 4 kV contact discharge, 8 kV air
discharge, HCP/VCP 4 kV
Satisfies EN 61000-4-3; 10 V/m (80 MHz - 1000 MHz)
Satisfies EN 61000-4-4; 2 kV power line, 1 kV data line
SatisfiesEN 61000-4-5; 1 kV data line, line-to-line 0.5 kV,
line-to-earth 0.5 kV
Satisfies EN 61000-4-6; 10 V (150 kHz - 80 MHz)
Satisfies EN 55022; Class B
Satisfies FCC CFR47 Part 15; Class B
0 °C to + 55 °C (IEC 60068-2-1, IEC 60068-2-2)
– 40 °C to + 80 °C (IEC 60068-2-14)
< 95 % (non-condensing) (IEC 60068-2-30)
10 to 58 Hz, 0.075 mm displacement;
2
58 to 150 Hz, 10 m/s (1 g) acceleration (IEC 60068–2–6)
5 to 9 Hz, 3.5 mm displacement;
2
9 to 500 Hz, 10 m/s (1 g) acceleration
IP 40
530 g
40 × 133 × 90 mm (with connectors)
Die-cast zinc / sheet aluminum
OZD Genius G12-1300
934 233-021
42