Cleaning; Important - Pressalit VALUE IV Manuel D'utilisation Et D'entretien

Cleaning

The plastic part of the seat can be removed for cleaning . Grab the handle at
the back and carefully pull the seat off the frame . After cleaning, put the seat
back on to the frame by pressing down on the four corners .
The product is to be cleaned with hot water or a mild soapy cleaning agent.
A list of suitable cleaning agents/disinfectants tested by Pressalit can be found
on pressalit.com.
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent.
• Do not use an autoclave or other type of steam cleaner.
• Avoid aggressive cleaning agents containing acids
• Never spray the product directly with a high pressure cleaner.
• For surface disinfection, chlorine-based disinfectants may be used
according to the product specification and safety precautions for these
products.
CAUTION
!

IMPORTANT

en
13