Front Panel - Numark NS6II Guide D'utilisation

Display
1. Active Deck: Indicates the currently active deck.
2. Platter Position: Displays the current track
position.
3. Time Bars: Provides a visual reference of the time
remaining for the current track. When the track is
almost over, the bars will flash as a warning.
4. Time Elapsed/Remaining: Displays the time
elapsed or time remaining for the current track.
Press Shift and the Scratch button to change the
display.
5. BPM: Displays the current BPM for the selected
track.
6. Pitch Adjust: Indicates the direction to move the
Pitch Fader to match the current track's BPM with
the track on the opposite deck.
7. Pitch: Displays the pitch of the current track.
8. Pitch Range: Displays the current pitch range.
9. Keylock: This icon illuminates when Keylock is active for the current deck. See the Serato DJ
manual to learn about Keylock.

Front Panel

8 7 6
1. Headphones (1/4" or 1/8"): Connect your 1/4" or 1/8" headphones to this output for cueing and
mix monitoring.
2. Headphone Volume: Adjusts the volume level of the headphone output.
3. Split Cue: When this switch is in the On position, the headphone audio will be "split" such that
all channels sent to Cue are mixed to mono and applied to the left headphone channel and the
Program mix is mixed to mono and applied to the right channel. When the switch is in the Off
position, Cue and Program audio will be "blended" together.
4. Cue Mix: Turn to mix between Cue and Program in the Headphone channel. When all the way to
the left, only channels routed to Cue will be heard. When all the way to the right, only the
Program mix will be heard.
5. Crossfader Contour: Adjusts the slope of the crossfader curve. Turn the knob to the left for a
smooth fade (mixing) or to the right for a sharp cut (scratching). The center position is a typical
setting for club performances.
6. Mic Level: Adjusts the level of the corresponding Mic Inputs.
7. Mic High: Adjusts the high (treble) frequencies of the audio signal coming from the
corresponding microphone input.
8. Mic Low: Adjusts the low (bass) frequencies of the audio signal coming from the corresponding
microphone input.
8 7 6 5
1
2
5
4
6
7
4 3
3
9
8
2 1
15