Accessories - Niko 360-45010 Mode D'emploi

360-45010
390-40011
Read the complete manual before attempting installation and activating the system.
1. DESCRIPTION
With the daylight control module 360-45010, the lighting in a room can be controlled automatically,
depending on the incident daylight and the motion detection (fig.1). The daylight control module
is energy-saving due to an optimum use of lighting. The module is preprogrammed for different
standard applications and is designed for DIN rail mounting (4U). The Power Pack 360-47000 is
used as a voltage supply (SELV) for the daylight control module and for switching the load. The
Power Pack is designed for DIN rail mounting. Areas of application: corridors, exhibition halls,
office premises, conference premises, school premises, production premises, canteens, sports
halls, lounges, warehouses.

Accessories

- Sensors: - light sensor 350-10011
- motion sensor 350-20010/350-20011
- Manual controls: - push button 170-00000
- single-pole switch 170-01100
- 4-fold push button with feedback LEDs 170-40100
- time switch 420-00200 + 1XX-78200
2. INSTALLATION
Cabling
The daylight control module 360-45010 is a SELV system.
Cabling sensor: ±0,5mm diameter for a distance of 200m
Positioning sensors
See user manual of the resp. sensor.
Note: Always mount the light sensor on a place with incident daylight (see fig.1). In case of sunblinds/
shutters, mount the light sensor in such a way that he is not placed in direct incident daylight.
EN 37