Power Management; The Child Safety Device - Electrolux EHH6332FOK Notice D'utilisation

www.electrolux.com
8

POWER MANAGEMENT

The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for
one cooking zone in the pair. The power in
the second cooking zone automatically de-
creases. The heat setting display for the re-
duced zone changes between two levels.
TIMER
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone:touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
touch
00
time (
cator of the cooking zone starts to flash
slow, the time counts down.
• To deactivate the Timer: set the cook-
ing zone with
vate the Timer. The remaining time
counts back to
cooking zone goes out.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
When the time comes to an end, the sound
operates and
zone deactivates.
• To stop the sound: touch
All manuals and user guides at all-guides.com
or of the timer to set the
99
- minutes). When the indi-
and touch to deacti-
00
. The indicator of the
. The indicator of
00
flashes. The cooking
You can use the Timer as a minute mind-
er while the cooking zones do not operate.
Touch . Touch or
When the time comes to an end, the sound
00
operates and flashes
• To stop the sound: touch
STOP+GO
The function sets all cooking zones that
operate to the lowest heat setting (
When operates, you cannot change the
heat setting.
The function does not stop the timer
function.
• To activate this function touch
symbol comes on.
• To deactivate this function touch
The heat setting that you set before
comes on.
LOCK
When the cooking zones operate, you can
lock the control panel, but not
vents an accidental change of the heat set-
ting.
First set the heat setting.
To start this function touch
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also
stop this function.

THE CHILD SAFETY DEVICE

This function prevents an accidental opera-
tion of the appliance.
To activate the child safety device
• Activate the appliance with
set the heat settings.
• Touch
for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
To deactivate the child safety device
• Activate the appliance with
set the heat settings. Touch
seconds. The symbol
• Deactivate the appliance with
to set the time.
).
. The
.
. It pre-
. The sym-
. The heat
. Do not
.
. Do not
for 4
comes on.
.