Using Your Dryer - Maytag MED6230RHW Guide De Référence Rapide

GET THE MAYTAG
With your mobile device download the Maytag™ app. You can get subscription and connectivity
instructions, terms or use, and privacy policy at www.maytag.com/connect or in
Once installed, launch the app and you will be guided through the
steps to subscribe and create your user account to connect to
your appliance. If you have any problems or questions, call Maytag
Connected Appliances at 1-866-333-4591.
When unit is first powered on, it will prompt to select language
before they see message to Download APP or press any other key
to setup WiFi later.
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
1
CLEAN LINT
SCREEN
Clean the lint screen before each
load. Also, clean the exhaust vent at
least every 2 years.
5
ADJUST CYCLE
SETTINGS, IF
DESIRED*
If you accidentally select wrong language during digital un-boxing and/or you want to get back to Factory settings then perform Factory Reset.
FACTORY RESET
Press/hold both TEMP and WRINKLE PREVENT keys until display count-down has completed. Unit will power back on with "Select
Language" display message.
*NOTE: See "Cycle Guide" for more information about cycles, settings, and options. Not all cycles, settings, and options are available with all
models. Read all your Manuals for more information on your unit.
APP AND GET CONNECTED
TM
Canada www.maytag.ca/connect.
®

USING YOUR DRYER

2
LOAD DRYER
6
SELECT ANY
ADDITIONAL
OPTIONS*
1
CONNECTING UNIT
TO INTERNET
To connect your unit to the internet
please download the Maytag app
TM
and press REMOTE ENABLE.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
3
PRESS POWER
TO TURN ON THE
DRYER
7
SET UP FOR
REMOTE ENABLE,
IF DESIRED
2
ALLOWING
REMOTE CONTROL
AND INTERACTION
You must press REMOTE ENABLE
when connected in order to allow
remote control and interaction.
4
SELECT THE
DESIRED CYCLE
FOR YOUR
LOAD*
8
TOUCH AND HOLD
START/PAUSE TO
BEGIN CYCLE
3