Technical Specifications - EXTOL PREMIUM 8893405 Traduction Du Mode D'emploi Original

Introduction
EN
Dear customer,
Thank you for the confidence you have shown in the Extol® brand by purchasing this product.
This product has been tested for reliability, safety and quality according to the prescribed norms and regulations of the
European Union.
Contact our customer and consulting centre for any questions at:
www.extol.eu
Manufacturer: Madal Bal a. s., Průmyslová zóna Příluky 244, 76001 Zlín, Czech Republic.
Date of issue: 2. 5. 2019
I. Description – purpose of use
9 Planer Extol® Premium 8893405 with a planing width of 110 mm is intended for planing,
bevelling and grooving wood, e.g. beams and boards.
9 Depth of cut can be set in 0.25 mm
intervals enabling precise planing of
material.
9 Planing depth (half-groove) of up to 8 mm provi-
des versatility when creating grooves and edges.
9 The planer can be attached to a stand with
the planer base plate pointing upwards and
to comfortably use it as a planer from finer
planing work.
9 Dust extraction can be connected on either the
right or left hand side of the planer thanks to a
mechanism for toggling dust extraction to the right
or left outlet.
9 The planer can be used to perform all-round planing work.
EN
II. Technical specifications
Order number
Supply voltage/frequency
Power input
Speed without load
Planing width
Adjustable depth of cut
Depth of half-groove
Sound pressure level, uncertainty K
Sound power level, uncertainty K
Vibration level on the handle; uncertainty K
(sum of three axes)
Hose adapter
Weight (without power cord)
IP
Protection class
y The declared aggregate vibration value and the declared noise emission level were measured in accordance with
standard testing methodology and may be used for the comparison of one tool with another. The declared aggregate
vibration value and the declared noise emission level may also be used for determining preliminary exposure.
•
WARNING
y Vibration and noise emissions during actual use of the power tool may differ from the declared values depending on
the method in which the tool is used, particularly the type of workpiece that is being worked on.
y It is necessary to determine the safety measurement for the protection of the operator, which is based on the assess-
ment of exposure under real operating conditions (to include all the parts of the work cycle such as time for which the
tool is turned off and when running idle outside the time that it is in operation).
III. Parts and control elements
Fig. 1, Position-description
1) Dust outlet with hose adapter
2) Trigger switch
3) Trigger lock release button
4) Main handle
5) Dust extraction toggle button
(to the right or left)
6) Belt cover
46 47
8893405
230-240 V~50 Hz
1,000 W
16,000 min -1
110 mm
0-3 mm (increments 0.25 mm)
up to 8 mm
94 dB; K=±3 dB(A)
105 dB; K=±3 dB(A)
a =4.7 m/s ; K=±1.5 m/s (main handle)
2 2
h
a = 11.6 m/s , K=±1.5 m/s (front handle)
2 2
h
inner ∅ (35.5 mm), outer ∅ (39.2 mm)
4.1 kg
20
II
7) Side guide rail or depth gauge locking screw
8) V-shaped groove for bevelling edges
9) Wood depth of cut scale in mm
10) Depth of cut adjustment screw
11) Front handle
EN