Technical Specifications - Audison Prima AP1 D Mode D'emploi

USER'S MANUAL
11. TECHNICAL SPECIFICATION
POWER SUPPLY
Voltage:
Idling current:
Switched off:
Consumption @ 14.4 VDC 2Ω Max Musical Power:
Remote IN
Fuse
AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4 Ω, 90% Output Power:
Distortion - THD @ 100 Hz, 4 Ω, 90% Output Power:
Bandwidth (-3 dB, 2 V RMS, 4Ω):
S/N ratio @ A weighted, 1,5V, Output Power:
Damping factor @ 100 Hz, 2 VRMS, 4 Ω:
Damping factor @ 1 kHz, 2 VRMS, 4 Ω
Input sensitivity PRE IN:
Input sensitivity SPEAKER IN:
Input impedance:
LOAD IMPEDANCE (MIN):
• Ch: 1
MAX POWER
OUTPUT POWER (RMS) @ 14.4 VDC, 1% THD:
• 1 Ch @ 4Ω:
• 1 Ch @ 2Ω:
OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
• 1 Ch @ 4Ω:
• 1 Ch @ 2Ω:
50
7.5 ÷ 15 VDC
1 A
<0.05 mA
30 A
7 ÷ 15 VDC (1 mA)
30 A
0.2 %
0.3 %
16 ÷ 40k Hz
100 dBA
150
160
Selectable: 1,5 - 3,0 - 4,5 V RMS
Selectable: 3,0 – 6,0 – 9,0 V RMS
15k Ω
2Ω
540 W
310 W x 1
540 W x 1
380 W x 1
680 W x 1
CEA SPECIFICATIONS
Output power @ 4Ω, ⩽1% THD+N, 14.4 V:
SN ratio (ref. 1 W output):
SIGNAL CONNECTIONS
PRE IN
SPEAKER IN
MUTE (Energy Saving Control)
GENERAL REQUIREMENTS
Ambient operating temperature range:
SIZE / WEIGHT
Max size (mm/in.):
Weight (kg/lb):
11
AP1 D /
310 W x 1
79 dBA
RCA
wired
wired from AP4.9 bit / AP5.9 bit
0 °C to 55 °C (32°F to 131°F)
198 x 45,50 x 134 / 7.8 x 1.8 x 5.27
1.32 / 2.91