Table des Matières
Publicité
User Level Compensation Table (TRIM)
A table of frequency/gain pairs allows the user to modify the generator output level with respect
to frequency to calibrate an entire test set up or improve the calibration of the generator alone.
The table can be created within the instrument or downloaded via the remote interfaces.
Maximum 100 points.
INTERFACES
Full digital remote control facilities are available through the RS232, USB, LAN and GPIB
interfaces.
RS232:
GPIB:
USB:
LAN:
GENERAL
Power:
Display
Data Entry:
Stored Settings:
Operating Range:
Storage Range:
Environmental:
Safety & EMC:
Size:
Weight:
Options:
Standard 9-pin D-connector. Variable Baud rate can be set between 1200
and 115200 Baud maximum
Conforming with IEEE488.1 and IEEE488.2
Standard USB 2.0 hardware connection. Operates as a virtual COM port.
Ethernet 100/10base-T hardware connection.
110-240VAC ±10% 50/60Hz; 100-120VAC ±10% 400Hz; 60VA max.
Installation Category II.
20 character x 4 row backlit alphanumeric LCD
Value entry of all major parameters direct by numeric keys, or by rotary
control and up/down keys at selected resolution.
Value stepping of frequency and level in user-defined increments is also
possible using the rotary control and/or up/down keys.
Up to 12 complete set-ups.
Up to 16 sweep lists
+5°C to +40°C, 20 - 80% RH
–20°C to + 60°C
Indoor use at altitudes up to 2000m, Pollution Degree 2.
Complies with EN61010-1 & EN61326-1.
For details, request the EU Declaration of Conformity for this instrument via
http://www.aimtti.com/support (serial no. needed).
86.5mm (2U) height; 213.5mm (½−rack) width; 350mm long.
3.65 kg
19-inch rack mounting kit.
5
Publicité
Table des Matières
