Facnor EC39 Notice De Montage page 25

4.12- CONTACTOR UNIT / CIRCUIT BREAKER / WIRING
200
215
Models Engine
power
12V
EF470-600 700W 800W
Swage the 5 pins of the remote plug.
Enrouleurs électriques FACNOR
relay box (mm)
Outside Ø of
electric wires
delivered
24V 12 & 24V
8 mm (5/16")
On picture against the relay box upon reception.
Open it by unscrewing 4 angle plastic screws.
Exit the bags and the manual in the box and close the box
DO NOT CONNECT ANY WIRE INSIDE THE BOX
Open the bags delivered in the box.
Swage the two 16mm² wire pins of the plug for the furler
wiring.
Swage the 2 pins of the plug onto the wires that come from
the battery through the circuit breaker. Choose the pins
according to wire section 25 or 35 mm².
.
.
code /part No document: 29160050150 –
-
circuit breaker (mm)
Maximum Section of
revolution delivered power
speed (rpm) supply wires
12 & 24V 12 & 24V
30 rpm
Please see page 26 for
wiring instructions
rev 07/2018
Circuit
breaker
amperage
12V
16 mm² 60A
IMPORTANT :
- page 25/27
24V
30A