Greenlee SITE-RITE Manuel D'instructions page 2

Description
The Greenlee heat-treated aluminum SITE-RITE
iron SITE-RITE II
to bend 1/2" through 1-1/4" EMT (electrical metallic tubing) and
1/2" through 1" rigid conduit.
Purpose
This instruction manual is intended to familiarize operators and
maintenance personnel with the safe operation of the Greenlee
®
SITE-RITE and SITE-RITE II
should be kept available to all operating personnel.
Inspect the tool for wear or damage. Replace worn, damaged,
or missing components with Greenlee replacement parts.
A worn, damaged, or improperly assembled component can
fail, resulting in injury or property damage.
Use this tool for manufacturer's intended use only. Use other
than that for which the tool was intended can result in injury.
SAVE THESE INSTRUCTIONS
Additional copies of this manual are available
2
Site-Rite
®
benders are manually-powered tools intended
®
A person who has not read and does not
understand all operating instructions is not
qualified to operate this tool.
Failure to read and understand safety
instructions could result in injury or death.
upon request at no charge.
Greenlee Textron / Subsidiary of Textron Inc.
®
/ Site-Rite II
Manual Benders. This manual
®
®
and malleable