Telecom Behnke 10 Serie Mode D'emploi page 46

Masquer les pouces Voir aussi pour 10 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instructions for Series 10
GB
Configuration and Set-up
Code
Parameter
Telephone number: Specification: cf. text
21
Telephone number
22
Telephone number
Telephone numbers contain cyphers only and hold a maximum
of 20 digits. When entering a telephone number, you may use
the following special characters:
*0
*1
*2
*7 1 = Activate relay
*8 x y = waiting for call answer (x = voice message played while
**0
*#
**** = Hang up (in case the relay is still activated, it will
By default, button 1 is set to dial extension 11 and button 2 is set
to dial extension 12 (cf. 3.3 default configuration in connection
with an AC14 AGFEO telephone system)
Use configuration step codes 50 to 59 to set-up the integrated voice message module. Using
the voice message module requires an additional 15 V power supply.
Reset voice message module:
50
* * * *
Performing a reset will return configuration step codes 51 to
59 to their default settings. Upon connecting a voice message
module and providing an additional 15 V power supply, all recor-
ded voice message will be erased and the number of long voice
messages will be set to its default setting 1.
Specify the number of long voice messages: Default setting: 1
* * * Number of long voice messages
1 =
2 =
3 =
4 =
The voice message module will store up to 5 short voice-messa-
ges, each a maximum of 4 seconds long. Additionally, the module
will store longer voice messages of up to 40 seconds. Via the
configuration steps 1 to 4, you may divide these 40 seconds into a
maximum of 4 long voice messages. The maximum number of
46
telephone number 1 (button 1)
telephone number 2 (button 2)
= dial *
= dial #
= Pause 2 seconds
waiting for call to be answered and y = voice message
played after call has been answered)
= Hotline function
= Flash function (150ms)
remain activated until the activation interval has
elapsed, then the device will hang up)
1 message (message no. 6: 40 s)
2 messages (message no. 6: 20 s and
message no. 7: 20 s)
3 messages (message no. 6: 15 s; message no. 7:
15 s and message no. 8: 10 s)
4 messages (message no. 6: 10 s; message no. 7:
10 s; message no. 8: 10 s and message no. 9: 10 s)
Confirmation
#
#
#
#
www.behnke-online.com

Publicité

Table des Matières
loading

Produits Connexes pour Telecom Behnke 10 Serie

Table des Matières