Cover For Wood, 4 Mm Airgap; Frame Power Supply - Winkhaus blueMatic EAV Instructions D'installation

blueMatic EAV
EN
2
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
STK/RNT
Cover for wood, 4 mm air gap, with 12 mm radi-
us for frame part tappet contact or frame power
supply, in packages of 10 pieces in a plastic bag
Description
STV-LB COVER STK/RNT
WOOD H4 R12 SW
The frame power supply is a switched-mode
power supply (single-phase, primary pulsed ins-
tallation current supply, high pulse load capacity,
short-circuit proof, open-circuit proof, high effi-
ciency, thermal overload protection) and must
be used exclusively in combination with electro-
mechanically operated WINKHAUS multipoint
locks and original WINKHAUS accessories.
The powerpack assembly is suitable for instal-
lation in the frame (for blueMatic EAV 12 V DC);
only the mains connection has to be made on
site (230 V).
230 V AC
•
•
•
•
6

Cover for wood, 4 mm airgap

7

Frame power supply

4 m cable for 230 V AC connection with wire
end ferrules
0.4 m cable with eyelet for earthing the door
profile
0.2 m cable with plug connector for connec-
tion to the tappet contact
4 m cable (6-wire) for external signal (poten-
tial-free contact: - minimum switch time 0.5
seconds) from external control systems, incl.
voltage supply, cable end separated and in-
sulated
18 5051251
Art.-No.
5035742