Installation Of Vandal-Proof Dome Cameras - Urmet VK 1099/201 Guide Rapide

EN

INSTALLATION OF VANDAL-PROOF DOME CAMERAS

Ceiling Mounting
1. Paste the sticker in place at the proper position as selected.
2. Remove the front component by loosening the three locking screws with a screwdriver.
3. Fix the pedestal by drilling locking holes around the sticker and inserting four expansion
bolts into the holes and fastening it with four locking screws. Adjust it to an appropriate
angle.
4. Fix the front component on the pedestal by tightening the three locking screws.
DS1099-002A
1
Setup of
Sticker
3
Expansion
Bolt
Locking
Screw
22
Locking
Screw
Locking
Screw
Completion of Installation
2
4