Thermador Pro Harmony PRD304WHC Instructions page 13

Side clearances
6" (152) 6" (152) 6" (152)
• The model shown is with the included island trim. A
low backguard option is available (purchased
separately).
• For an island trim install, counter surface should have
a cantilever edge meeting the back section of the
island trim.
• If an inner wall is used under the cantilever counter
top there should be a 1/8'' (3 mm) gap from the rear
of the range.
Page. 11
28" (711)
⅝
24 " (625)
⅞
23 " (606)
¾
24 " (629)
23" (584)
⅞
44 " (1,140)
• There is a 44-7/8'' (1,140 mm) total clearance.
• Shaded area behind range indicates minimum
clearance to combustible surfaces. Combustible
materials cannot be located within this area with the
Island Trim.
• There is a 23-7/8'' (606 mm) maximum recess depth.
30" (762) –
36" (914)
¾
36
⅞
35
" (933) –
" (911)
inches (mm)