Thermador Pro Harmony PRD304WHC Instructions page 10

Cabinet clearance requirements with the
included island trim

as defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI
Z21.1 scope and are not certified by CSA. Clearances of less than 6'' (152 mm) should be approved by the local codes and/or by the local authority
having jurisdiction.
⅞ ⅞ ⅞
35 35 35 " (911) – " (911) – " (911) –
¾ ¾ ¾
36 36 36 " (933) " (933) " (933)
inches (mm)
Page. 8