Fein ALG30 Mode D'emploi page 12

OBJ_BUCH-0000000028-003.book
OBJ_BUCH-0000000028-003.book Page 12 Wednesday, December 12, 2018 9:13 AM
en
12
Meaning of the LED indications – ALG30/50.
LED indicator
continuous yellow
light
green flashing light The rapid charging is active.
continuous green
light
red flashing light
green flashing light
and red flashing
light
Meaning of the LED indications – ALG80.
LED indicator
continuous green light
continuous yellow light
Continuous red light
Meaning
The battery charger is ready for operation; mains voltage is given.
The rapid charging is completed. Trickle charging is active (only NiCd/NiMH batter-
ies).
Charging not possible due to the following possible reasons:
– Contacts contaminated. Improvement measure: Clean the contacts by inserting and
removing the battery several times.
– The battery is defective. Improvement measure: Replace the battery!
The battery temperature is not within the charge-temperature range of 5 °C to +45
°C. The rapid charging procedure starts as soon as the battery reaches the allowable
charging-temperature range.
Meaning
The battery charger is ready for operation; mains voltage is given.
The battery temperature is not within the charge-temperature range of 5 °C to +45
°C. The rapid charging procedure starts as soon as the battery reaches the allowable
charging-temperature range.
Charging not possible due to the following possible reasons:
– Contacts contaminated. Improvement measure: Clean the contacts by inserting and
removing the battery several times.
– The battery is defective. Improvement measure: Replace the battery!