What Is An Ata (Analog Telephone Adapter); Recommendations And Factory Settings; Important - Sagem Fax ATA 101S Livret Utilisateur

Sagem_Fax_ATA101S.book Page 1 Jeudi, 21. février 2008 5:09 17
U
SER GUIDE
W ATA (A
HAT IS AN NALOG
The Sagem Fax ATA 101S is a voice over IP gateway allowing you to
connect analog terminals (fax machine, telephone, etc.) to a voice
over IP infrastructure (IP operator, IPPBX or VoIP gateway).
Through the Sagem Fax ATA 101S, you can continue to use your
analog telecommunications peripherals via your voice over IP
telephone architecture.
R
ECOMMENDATIONS AND FACTORY SETTINGS
Make sure to reserve an IP bandwidth sufficient to provide
transmission quality.
The bandwidth to be reserved depends on the codec you use:
• G711: 64 Kbps
• G729: 8 Kbps
• T.38: up to 14.4Kbps
The default network data of the setup Ethernet port (LAN port) are as
follows:
• IP address: 192.168.134.1
• Sub-network mask: 255.255.255.0
• User name: user
• Password: user
The Sagem Fax ATA 101S has two Ethernet ports
(RJ45):
• LAN provides access to the unit's setup via the
manual setup method (see "See Installation and
manual setup (via the Web setup interface)",
page 3).
• WAN provides access to the unit's automatic
setup (see "See Automatic installation and setup
(via TFTP)", page 8) and allows the unit to be
connected to an IPBX, a VoIP gateway or an IP
operator.
User guide
T A )?
ELEPHONE DAPTER

Important

1