SilverCrest SSM 300 B1 Manuel D'utilisation Et Informations Sur Les Services page 36

Mixeur plongeant
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SilverCrest SSM 300 B1
 Make sure that the power cord cannot be damaged by sharp
edges or hot spots. Do not trap or squash the power cord. Always
hold the power cord by the mains plug and never pull on the cord
itself. Always lay the power cord so it does not present a trip
hazard. There is a danger of injury!
 Always disconnect the device from the mains supply if it is left
unattended and before assembling, disassembling or cleaning, or
if there is a problem with the device. There is a risk of electric
shock!
Never immerse the motor unit (3) in water and do not allow
liquid to penetrate into the casing of the motor unit (3).
 If liquid does penetrate into the casing of the motor block (3),
unplug the mains plug from the socket and consult customer
services (see chapter on "Warranty information"). There is a risk
of electric shock!
 Never touch the motor unit (3), the power cord or the mains plug
with wet hands. There is a risk of electric shock!
 Disconnect the stick blender from the mains immediately after use.
The device is only without electrical power if the mains plug is
disconnected. There is a risk of electric shock!
DANGER: Risk of fire
After the maximum operating time of up to 1 minute, allow the device
to cool for at least 1 minute before continuing to purée/mix.
Afterwards, wait for it to cool down. There is a risk of fire.
34 - English

Publicité

Table des Matières
loading

Table des Matières