Order List - Dräger Flame 1500 Notice D'utilisation

en |
Technical data
Terminal wire size:
Ingress protection:
Mounting bracket
Support fixing:
Vertical adjustment range:
Horizontal adjustment range:
Environmental specification
Operation ambient temperature:
Storage ambient temperature:
Relative humidity:
Operation specification
Detector range (depth of field):
Sensitivity range:
Detector response time:
Horizontal field of view:
Vertical field of view:
Alarm setting:
Self-test facility:
Heated optics
LED status
Output options:
16
2
2.5 mm (14 AWG)
IP66 (NEMA 4X)
M8 (quantity 2)
0 - 45°
±45°
-60 to +85 °C (-76 to +185 °F)
-60 to +85 °C (-76 to +185 °F)
0-100 % (non-condensing)
2-60 m (6-200 ft)
Low, Medium (Factory default) and
High
4 - 30 s
90°
90°
Non-latching with automatic reset
after 15 s (default) OR Latched until
the power is removed from detector.
Yes – no mirror continuous automatic
optical verification
Yes
Tri-state LED
®
0(4) - 20 mA, HART 7, Relay con-
tacts - alarm and fault
Relay:
Communication/Configuration:
RFI/EMC:
Power on reset delay:
10

Order list

Description
Dräger Flame 1500 variants
2 x M25, aluminium
2 x M25, stainless steel
2 x 3/4" NPT, aluminium
2 x 3/4" NPT, stainless steel
Flame simulator
Dräger FS-5000
Accessories
Bracket standard, 316 stainless steel
Bracket marine, 316 stainless steel
Sunshield, Flame 1x00/3x00/5x00
Mount kit, 2" pole
Mount kit, 3" pole
Mount kit, 4" pole
Sealing kit detector, metric
Instructions for use
2 Relay Contacts – Alarm and Fault.
DPDT, 2 A @ 30 Vdc
®
RS485 and HART 7
Complies with IEC 61000
5 s
Part number
372 15 19
372 15 18
372 15 17
372 15 16
42 093 07
37 18 732
37 01 298
37 01 299
37 01 300
37 01 301
37 01 302
37 01 303
|
Flame 1500