Steps
1. Pull the securing clips on each end of the memory-module slot until the memory module pops up.
2. Slide and remove the memory module from the memory-module slot.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
NOTE:
Repeat step 1 to step 2 to remove any other memory modules installed in your computer.
NOTE:
Note the slot and the orientation of the memory module in order to replace it in the correct slot.
Installing the memory
Prerequisites
Si vous remplacez un composant, retirez le composant existant avant d'exécuter la procédure d'installation.
About this task
The following image indicates the location of the memory and provides a visual representation of the installation procedure.
Retrait et installation de composants
19