Installing The Side Cover - Dell OptiPlex 3000 Manuel D'entretien

Steps
1. Loosen the thumbscrew (6-32) that secures the side cover to the system.
2. Slide the side cover towards the front of the system to disengage the tabs from the slots on the system.
3. Slide and remove the side cover from the system.

Installing the side cover

Prerequisites
Si vous remplacez un composant, retirez le composant existant avant d'exécuter la procédure d'installation.
About this task
The following images indicate the location of the side cover and provide a visual representation of the installation procedure.
Retrait et installation de composants 13