Installation In The Optional Qcx-Mini Enclosure - QRP Labs QCX-mini CW Mode D'emploi

3.47 Installation in the optional QCX-mini enclosure

L'installation dans le boîtier du QCX-mini est simple et ne nécessite aucun câblage. Il est
important d'effectuer le montage dans l'ordre correct, comme suit.
Start with the Display board...
Peel off the plastic protective coating from
the LCD module.
Slide the display board into position along
the PCB guide rails in the enclosure.
... and the main board, with the controls
board bolted in position.
Here's the top half of the enclosure. Note the
PCB guide rails in the extrusion walls.
Bolt the right-hand side panel to the main
PCB using the supplied BNC washer and
nut
QCX-mini assembly Rev 1.05_Fr
90