domoova DRV80 Connect Mode D'emploi page 20

EN
Operating the robot
Home base mode
If you need to charge the robot at any time while it is in use, you can
do so by pressing the "Home Base" button on the remote control.
The robot will automatically go back to home base after searching
(search time depends on the distance between the home base and
if there are any objects along its route).
Pause
To pause the robot, press the AUTO button on the robot or CLEAN
on the remote control.
NOTE: The robot automatically switches to stand-by after around 10 minutes. It can
be switched back on at any time by pressing the AUTO or CLEAN buttons. Press the
button a second time to reactivate its cycle.
Stop
When the robot finishes its cleaning cycle, it goes back to home
base. To manually stop the robot, press the AUTO button on the
robot or CLEAN on the remote control.
18
MAX