Glem Gas GHS972IX Mode D'emploi page 68

9. After adjust the height,fix the body with 2 pcs ST4*30mm safety screws. Note: The two
safety vents are positioned on the back housing, with a diameter of 6mm. Then put the two
chimneys together onto the cooker hood body. See Pic 7.
10. Adjust the height of the inside chimney into the suitable height, and fix the inside chimney
to the inside chimney bracket with 2pcs ST4*8mm screws. See Pic 8.
Carbon filter installation：
(1) The aluminum filter should be detached first. Press the lock and pull it downward.
(2) Install the carbon filter by rotating the carbon filter clockwise.
Remark：
Install the expansion pipe on the cooker hood if need. Fix the expansion pipe with a cable
tie.(The expansion pipe and cable tie are not supplied with the product. They are optional)
68