4. Equip the adaptor on the outlet , See pic 4. Put the cooker hood on the hook. See pic 5.
5. Install the outside chimney bracket onto the outside chimney with 2pcs ST4*8mm screws,
make sure the inside chimney can be moved inside freely.See pic 6.
6. After adjust the height,fix the body with 2 pcs ST4*30mm safety screws. Note: The two
safety vents are positioned on the back housing, with a diameter of 6mm. Then put the two
chimneys together onto the cooker hood body. See Pic 7.
7. Adjust the height of the inside chimney into the suitable height, and fix the inside chimney
to the inside chimney bracket with 2pcs ST4*8mm screws. See Pic 8.
66