Installation - Glem Gas GHS972IX Mode D'emploi

INSTALLATION (VENT OUTSIDE)
If you have an outlet to the outside, your cooker hood can be connected as below picture by
means of an extraction duct (enamel, aluminum, flexible pipe or non-flammable material with
an interior diameter of 120/150mm)
Before installation, turn the unit off and unplug it from the outlet.
Method 1(Installation with hook):
1. The cooker hood should be placed at a distance of 65~75cm above the cooking surface for
best effect.
2. Install the hook on a suitable place once the installation height is fixed, and keep it in line.
The fixed position of the inside chimney bracket is the place of chimney. See pic 2.
3. Put the glass according to the lead direction and way on the cooker hood, and then use
4pcs screws + washers + rubber cushions for glass to fix the glass.See pic 3.
65