Glem Gas GHS972IX Mode D'emploi page 67

Method 2(Installation without hook):
1. The cooker hood should be placed at a distance of 65~75cm above the cooking surface for
best effect.
2. After decide the cooker hood height, measure the position of the holes for hanging the
hood and inside chimney bracket. Drill 4 pcs φ8 holes, they are for fixing intside chimney
bracket and the hood,and keep the hood level. The fixed position of the outside chimney
bracket is the highest place of outside chimney. Screw 2pcs ST4 × 30mm screws on the wall
with wall plugs and then use 2pcs ST4×40mm screws to fix the inside chimney bracket. The
screws(ST4 × 30mm) installed should leave for 3-5mm out of the wall to hang the hood. See
pic 2.
3. Put the glass according to the lead direction and way on the cooker hood, and then use
4pcs screws + washers + rubber cushions for glass to fix the glass.See pic 3.
4. Equip the adaptor on the outlet, see pic 4. Put the cooker hood on the wall mounted
screws. See pic 5.
8. Install the outside chimney bracket onto the outside chimney with 2pcs ST4*8mm screws,
make sure the inside chimney can be moved inside freely.See pic 6.
67