Detax Detaseal hydroflow putty 1:1 Mode D'emploi page 15

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Latex gloves and latex-contaminated surfaces can affect curing.
In case of stiffness or clogging discard the cartridge; do not use force for application!
Do not leave any residues of the impression material in the patient's mouth or sulcus, and make sure to avoid inadvertent
pressing of material into areas outside the oral cavity through mouth-antrum connections or malformations of the palate.
Cured silicon materials are chemically resistant – avoid stains on clothing.
Wear suitable personal protective equipment during the finishing of the cured material.
Refer to the relevant safety data sheet for hazard and safety information.
notes
DETAX shall not be held liable for any damage caused by misuse.
Read and understand the safety data sheet!
for users and/or patients:
Any serious incidents occurring in relation to this product should be reported immediately to incident@detax.de and to the
competent authority of the Member State in which the user and/or patient is established.
contrainDication
Do not use this material in case of known allergies to any of the ingredients, or contact allergies. Silicone impression materials
have been tried and tested millions of times; undesired effects are not to be expected in case of proper application. However,
as a matter of principle immune reactions such as allergies or irritations cannot be ruled out. In case of doubt, we recommend
performing an allergy test before application.
DisPosal
Disposal of the contents/container must be carried out in accordance with the local/regional/national and international
regulations.
15

Publicité

Table des Matières
loading

Produits Connexes pour Detax Detaseal hydroflow putty 1:1

Table des Matières