Instructions For Use - Beurer medical BC 28 Mode D'emploi

Permissible operating + 10°C to +40°C, ≤85% relative
conditions humidity (non-condensing)
Permissible storage -20°C to +55°C, ≤ 85% relative
conditions humidity, 800 –1050 hPa ambi-
ent pressure
Power supply 2 x 1.5V
Battery life For approx. 170 measurements,
depending on levels of blood
pressure and pump pressure
Accessories Instructions for use, 2 x 1.5V AAA
batteries, storage box
Classification Internal supply, IPX0, no AP
or APG, continuous operation,
application part type BF
Technical information is subject to change without notifi-
cation to allow for updates.
• This device complies with European Standard
EN60601-1-2 and is subject to particular precautions
with regard to electromagnetic compatibility. Please
note that portable and mobile HF communication sys-
tems may interfere with this unit. More details can be
requested from the stated Customer Services address
or found at the end of the instructions for use.
• The device complies with the EU Medical Devices
Directive 93/42/EEC, the German Medical Devices Act
(Medizinproduktgesetz) and the standards EN1060-1
(Non-invasive sphygmomanometers – Part 1: General
requirements), EN1060-3 (Non-invasive sphygmoma-
nometers – Part 3: Supplementary requirements for
AAA batteries
electro-mechanical blood pressure measuring sys-
tems) and IEC80601-2-30 (Medical electrical equip-
ment – Part 2 – 30: Particular requirements for the
basic safety and essential performance of automated
non-invasive sphygmomanometers).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical
purposes, it must be regularly tested for accuracy by
appropriate means. Precise instructions for checking
accuracy may be requested from the service address.
29