Installing The Holder-Feet; Holder-Feet Components - Samsung harman/kardon HW-Q70R Manuel Complet

7. Install the Soundbar with the attached
Bracket-Wall Mounts by hanging the
Bracket-Wall Mounts on the Holder-Screws
on the wall.
8. Slide the Soundbar down as shown below so
that the Bracket-Wall Mounts rest securely
on the Holder-Screws.
• Insert the Holder-Screws into the wide
(bottom) part of the Bracket-Wall
Mounts, and then slide the Bracket-Wall
Mounts down so that the Bracket-Wall
Mounts rest securely on the
Holder-Screws.
10 INSTALLING THE
HOLDER-FEET

Holder-Feet Components

Holder-Foot
• The Holder-Feet raise the Soundbar so you
can install the Soundbar in front of your TV
and above the legs of the TV's stand. See the
illustration below.
• You can set the Holder-Feet to one of three
different heights.
• Using the Holder-Feet, you can adjust the
distance between the Soundbar and your TV
to fit your TV stand's shape.
ENG - 34
x 2
Holder-Support
x 2
Screw
TV
x 2