Learning To Ride The Smart Skateboard; Methods Of Use - IWatMotion smart Manuel D'instructions

2

Learning to ride the Smart SkateBoard

2.1 METHODS OF USE

Extra precautions must be taken before riding the Smart SkateBoard, therefore it is
very important that you read the entire manual carefully to fully understand the Smart
SkateBoard's various functions.
• STEP 1: Turn ON the Smart SkateBoard by pressing the ON/OFF button.
• STEP 2: Get ready to ride! By putting a foot on the pad, the gyroscope will start-up
and then the ON light will appear. Now that the Smart SkateBoard's self-balancing
has kicked in, the next step is to place your other foot on the pad.
• STEP 3: After successfully mounting the Smart SkateBoard and remaining there,
hold your balance and the Board should remain steady, it will only advance or
reverse when the user inclines their weight forward or backwards. Remember to
avoid sudden movements.
• STEP 4: Incline your left or right foot to turn in that direction
• STEP 5: Before getting off of the Smart SkateBoard, it is necessary that you
remain completely still and balanced. First place one foot on the ground behind
you (heel to toe) and then directly remove the other foot (also behind you).
26