lamber S480-ek Instructions D'emploi page 10

First Section - FOR THE USER
WORKING AND USE
The S480-ek can wash up to 900 mixed-size glasses every hour.
The machine protection degree is IP21, therefore it should not be washed with direct high pressure jet water.
The objects to be washed should be correctly arranged for a good washing-up result.
We suggest to descale glasses, from time to time, in order to remove calcareous and/or starchy sediments
by soaking them in suitable solutions suggested by your cleansing agent supplier.
If you need to buy new dishes remember the following: Dishes and cups: preference must be given to
china or non-porous pottery articles, with smooth surface. Glasses: choose a glass suitable to be washed
in dish-washing machines. Surfaces must be smooth and bottoms as flat as possible.
OPERATION BEFORE WASHING
B
EFORE STARTING THE WORKING OPERATION BE
:
SURE THAT
- the cock is open;
- the filters and the overflow are in
their housings;
- the wash arm and the rinse arm are free to
pivot;
- brightener and washing powder dispenser
containers are loaded.
T :
HEN PROCEED
A
- Place the dishes in the basket minding to
previously remove all solid waste and fat.
Do not overload baskets, dishes must not be
placed one upon the other, water must have the
way to run on each part of the same.
B
- Turn the machines on by wall switch and
push the switch "A" situated in Dis.1.
At this moment the thermometer display lights up
And the tank fills up. When the tank is full the
control lamp for cycle "2" lights up.
C
– Introduce the basket in the dishwasher.
The control lamp "E" will flash in case the door of
the dishwasher is open.
Before you start the cycle be sure that the control
lamp "D" is flashing. This means that the water for
the washing cycle
temperature reached the ideal temperature for
working.
D
– Choose the washing period cycle and push
the button "B" between the following items:
- lamp 1 flashing – short cycle of 1 minute
- lamp 2 flashing – medium cycle 2 minutes
- lamps 1 and 2 lightening at the same time
long cycle of 3 minutes.
and the rinsing water
The washing period cycle has to be chosen
regarding the dirt that has to be removed.
E –
Close the door of the dishwasher.
Push the button cycle "C"
The dishwasher starts the washing with the period
you chosen. Additional to this period will be a
pause of 5 seconds and a rinsing period of 18
seconds with clean water about 85° to 90°C
(180÷195°F).
The control cycle lamp is flashing up to the end of
the complete washing period. Finished the
washing period the control lamps will stop
lightening.
The lighting of the control lamp "D" means that
the water reached the needed temperature of 85°
to 90°C (180÷195°F).
The rinsing will start working of by the reached
temperature need. That means the period of the
washing cycle you chosed will be extended up to
having reached the exact temperature.
It is possible to interrupt the washing cycle at any time
simply pushing again button "B".
G
– Extracting the basket inclines and shakes it
carefully. So the rest of the water drops will be
eliminated.
Leave the dishes in the basket until its will be dry
by evaporation. Take the dishes away from the
basket and pay attention not to touch the dishes
on its border and put the on clean shelves.
To continue carry a new basket, introduce it in
the machine, close the door and press button
"C".
Endless cycle (maximum 15 minutes) : the door
-
being closed and the cycle put on (any cycle), keep the
button "B" pressed for 3 seconds: lamps 1 and 2 will
flash at the same time (thermocontrol excluded); the
cycle can be interrupted at any time pressing again
button "C" that will let final sequences start.
9
ENGLISH