Adjusting The Door Bins - Dacor DTF36FCS Manuel D'utilisation

Adjusting the Door Bins

The bins on the inside of the refrigerator doors can be
positioned for height and can be removed for cleaning.
Empty the bin before removing it from the door.
Removing the Door Bins
Use both hands when removing and installing all bins
1. Grasp the bin on both sides.
2. Pull up firmly at the same time, keeping both sides
level.
3. Detach the back of the bin from the refrigerator door,
and release.
Installing the Door Bins
Use both hands when removing and installing all bins.
1. Grasp the bin on both sides.
2. Place the notch on the back of the bin against the
refrigerator hook, keeping both sides level.
3. Slide the back of the bin into the refrigerator door, and
release.
Adjusting the Bin Height
Bins that are in the middle of the door can be adjusted up
or down.
1. Grasp the bin on both sides.
2. Press the gray latch located on the sides of the bin.
This will release the lock.
3. Raise or lower the bin to your position. Make sure the
bin is level.
4. Release the gray latches to lock the bin. The bin will
catch on the hooks and lock into place.
IonFresh
Air is ionized by means of the ionizer system in the
refrigerator compartment air duct. Air-borne bacteria and
odorizing molelcules are eliniated.
User Instructions
25
Removing the Bins
hook
hook
Installing the Bins
hooks
hooks
gray
latch
Adjusting the Bin Height
gray
latch