Technical Specifications - Drive DeVilbiss Healthcare AIR FORCE ONE Mode D'emploi

TECHNICAL SPECIFICATIONS

Power supply:
Minimum filling volume:
Maximum filling volume:
Nebulization rate:
Maximum pressure:
Weight:
Size:
Noise level:
Expected service life:
– Class II device as regards protection against electric shocks.
– Nebulizer, mouthpiece and masks are type BF appled parts.
– Device not protected against sprinkles.
– Device not suitable for use in presence of anaesthetic mixtures inflammable with air, oxygen or nitrogen
protoxide.
– Device for intermittent use (30 min ON / 30 min OFF)
– Device not suitable for use in anaesthesia or lung ventilation systems.
Aersosol characteristics according to EN 13544-1 ANNEX CC
Flow:
Aerosol output:
Aerosol output rate:
Particle size (MMAD):
NOTE: The technical specifications may change without prior notice.
Applied standards Electric Safety Standards:
Electric Safety Standards EN 60601-1. Electromagnetic Compatibility according to EN 60601-1-2. Class IIa
Medical Device according to the 93/42/EEC European Directive on Medical Devices
Enviroment conditions
Storage:
Temperature:
Humidity:
Atmospheric
pressure:
MQ5890_EU_11
230V 50 Hz AC
2 ml
8 ml
0,3 ml/min
2,2 bar
1,5 kg
200 x 145 x 97 mm
52 dBA
1000 hours
5,1 l/min
0,45 ml
0,02 ml/min
ca. 5 µm
MIN -25 °C MAX +70 °C
MIN 10% RH - MAX 95% RH Humidity:
700 hPa - 1060 hPa
Operation:
Temperature:
Atmospheric
pressure:
MIN +10 °C - MAX +40 °C
MIN 10% RH - MAX 95% RH
700 hPa - 1060 hPa
EN - 17