Assembly; Cleaning | Maintenance; Cleaning & Maintenance; Technical Data - Drive DeVilbiss Healthcare DURO KD Mode D'emploi

Assembly

The shower chair is preassembled; only the back rest
needs to be clicked into place and the 4 adjustable feet
need to be assembled (pic. 1-2).
1

Cleaning | Maintenance

• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based cleaners!
• To disinfect, a spray disinfectant can be used such as Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• In the event of defects, contact your specialist dealer from whom you purchased this product.

Technical data

Product
Article number
Overall width
Overall height
Overall depth
Seat width
Seat depth
Seat height
Total weight
Load max.
Frame material
Material seat section
and backrest
Drive Medical GmbH & Co. KG | As per: 10.06.2020 | Errors and alterations excepted
2
DORU KD without backrest
550500900
53 cm
44 - 54 cm
48 - 52 cm
50 cm
30 cm
42 - 52 cm
2 kg
130 kg
Aluminium pipe
PP (polypropylene) /
PU (polyurethane)

Height adjustment of the feet

Before using the product, ad-
just it to the desired height
(pic. 3). To adjust the height of
the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the button
clicks into place in the de-
sired position (2). Ensure that
the pushbutton has correctly
clicked into place.
Ensure that all four legs are adjusted to the same height.
DORU KD with backrest
PP (polypropylene) /
EN
3
550500950
53 cm
71 - 81 cm
52 - 56 cm
50 cm
30 cm
42 - 52 cm
2,9 kg
130 kg
Aluminium pipe
PU (polyurethane)
Instructions for use DURO KD
9