Safety Instructions; Use; Assembly; Cleaning | Maintenance - Drive DeVilbiss Healthcare Drive TSE 100S Mode D'emploi

Safety instructions

• Do not use if there are any defects!
• Caution – risk of slipping/falling!
• Check the raised toilet seat regularly for a secure fit on
the toilet bowl. Retighten the fixing screws if necessary.
• Take note of the permitted maximum weight of the user.
This information can be found in the technical data in
these instructions for use as well as on the identifica-
tion plate.

Use

The raised toilet seat TSE 100S is suitable for nearly all
standardized or commercially available toilet bowls.

Assembly

• Screw both fixing screws to the underside (see photo).
• Fold up the toilet seat and toilet lid; disassemble if
necessary. Place the product on the toilet bowl. The
stop lug must fit against the front of the toilet bowl.
Secure to the toilet bowl on the right and left using
both fixing screws.

Cleaning | Maintenance

• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• The product should not be exposed to temperatures
above 60°C for long periods of time (for example, use
in a sauna, etc.).
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
Drive Medical GmbH & Co. KG | As per: 09.06.2020 | Errors and alterations excepted

Technical data

Product
Article number
Overall length
Overall width
Overall height
Opening length
Opening width
Weight
Max. load
Color
Material
EN
TSE 100S
523500000
38,5 cm
37 cm
11 cm
25,5 cm
22,5 cm
2,1 kg
250 kg
blue
Plastic (Polyurethane PU)
9
Instructions for use TSE 100S