Kenwood KMM-BT308U Mode D'emploi page 13

To Do this
Switch between
Press 6 IW during a call.
hands-free and
• Operations may vary according to
private talk modes the connected Bluetooth device.
Adjust the phone
Turn the volume knob during a call.
volume
Phone volume: [00] to [35]
(Default: [15])
• This adjustment will not affect the
volume of the other sources.
Switch between
Press
two connected
• Not applicable during a call.
phones
Improve the sound quality during a call
While talking on the phone...
1 Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to make a selection (see the
following table), then press the knob.
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press
.
MIC GAIN –20 — +8 (0): The sensitivity of the microphone increases
as the number increased.
NR LEVEL –5 — –20 (–10): Adjust the noise reduction level until the
least noise is being heard during a phone conversation.
ECHO CANCEL 1 — 10 (4): Adjust the echo cancellation delay time until
the least echo is being heard during a phone conversation.
repeatedly.
Default: XX
Text message notification
When the phone receives a text message, the unit rings and "SMS RECEIVED"
appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1
Press and hold to activate Voice Recognition.
The connected phone (which has been paired the earliest) is activated. However,
if priority device is connected, pressing and holding
device. ( 15, DVC PRIORITY)
2 Speak the name of the contact you want to call or the voice command to
control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
Bluetooth mode operations
1
Press to enter Bluetooth mode.
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
3
Press and hold to exit.
To return to the previous setting item or hierarchy, press
To enter [PHONE BOOK] directly, press
Press again to switch between the phonebooks of the connected phones.
1 Press the volume knob to select a name or a phone number.
CALL
• "I" indicates call received, "O" indicates call made, "M" indicates call missed.
HISTORY
• Press DISP SCRL to change the display category (NUMBER or NAME).
• "NO DATA" appears if there is no recorded call history.
2 Press the volume knob to call.
BLUETOOTH®
activate the priority
.
. ( 14, PHONE BOOK)
ENGLISH | 13