Rating Plate - CASO DESIGN Dry-Aged Cooler 688 Mode D'emploi Original

Setting of the humidity of the air:
 When the temperature is set to 2 °C, humidity can be set between 50% and 70%.
 When the temperature is set to 3 ° C, humidity can be set between 50% and 75%.
 When the temperature is set to 4 ° C or higher, humidity can be set between 50% and
85%.
Press the
in increments of 1%. When the device has reached the desired humidity, then the
corresponding LED lights up in green color.
You are able to display the set humidity of the air by pressing the
equipment will then revert to displaying the temperature.
For ideal maturity results we recommend the following setting: temperature 3°C / air humidity
75%.
Water tank
Fill the water tank to above the minimum mark. Please pay attention to the maximum
mark and make absolutely sure that you do not fill the water tank so that the water level is
above the maximum mark.
16.2

Rating plate

The rating plate with the connection and performance data can be founded on the back of
the device.
key. By using the key, you can change the humidity of the air
The equipment will emit
several warning sounds and
the display will flash if the
water tank is empty.
In order to be able to control
the humidity of the air
effectively, you will have to
fill the water tank with
sufficient water.
The Watertank is devided in
two parts. Fill the water in
tank A. Tank B is for the
condensed water. Empty and
clean it regularly.
key. The
37